https://www.asage.dev/Sometimes I document my interesting encounters with Technology. 2026-01-18T19:42:10-05:00 Adam Sage https://www.asage.dev/ Jekyll © 2026 Adam Sage /assets/img/favicons/favicon.ico /assets/img/favicons/favicon-96x96.png 2025-12-26T22:02:34-05:00 2025-12-26T22:02:34-05:00 https://www.asage.dev/posts/mitmrouter-ssh-remote-packet-capture-with-wireshark/ Adam Sage

This post will go over how to set up remote packet capture using Wireshark over SSH. Prerequisites: tcpdump installed on the mitmrouter host sudo exception to run tcpdump on the mitmrouter host Wireshark installed on remote machine with sshdump selected for install during the installation process sshdump configured Installing tcpdump is straightforward: Run sudo apt install tcpdump ...

2025-12-25T20:00:13-05:00 2025-12-28T14:10:01-05:00 https://www.asage.dev/posts/mitmrouter-setup-on-a-velo-640-running-ubuntu-server/ Adam Sage

Matt Brown has a tool called mitmrouter here. mitmrouter turns your device into a WiFi access point that can intercept and inspect network traffic from connected devices. This is useful for security research, IoT device analysis, and understanding how applications communicate over the network. By positioning yourself in the middle of the network traffic (man-in-the-middle), you can capture pac...

2025-12-24T13:34:32-05:00 2025-12-24T13:34:32-05:00 https://www.asage.dev/posts/qnap-storage-expansion/ Adam Sage

I’ve been on the very edge of running out of storage space on my NAS (QNAP TS-673A) for a couple years now. Earlier this month, I hit only 200GB free space on my 10TB RAID array so it was time to take action. My current setup is running 2 10TB Ironwolf drives and 4 2TB WD Red drives. The 2 10TB drives are in a RAID 1 (mirror) and the 4 2TB drives are in a RAID 10 (striped mirror). The 10TB ...

2024-10-20T14:56:27-04:00 2025-12-24T22:24:24-05:00 https://www.asage.dev/posts/hacking-a-velo-640-to-install-opnsense/ Adam Sage

I was recently made aware of the Velo 640 and its decent hardware. By default this piece of hardware comes with VMware’s VeloCloud installed on it, but it’s of little use to home users. ServeTheHome has an excellent thread here with all the information I needed to wipe the default OS and install OPNsense, which is far more useful. The Velo 600 series (and likely other lines) is just a custom bu...

2024-10-05T15:33:34-04:00 2025-12-24T22:24:24-05:00 https://www.asage.dev/posts/setting-up-the-chirpy-theme-and-jekyll/ Adam Sage

I thought a good first post would be how I set up this site. It was quite a learning experience and took longer than expected due to all the rabbit holes I ventured down that I probably should have avoided. I opted to go the free hosting route because I’m cheap. Unfortunately, as with almost everything free, it required quite a bit of work on my end to figure out how to make it work and to mak...